Home Average Handling Time

Average Handling Time

Do your Agents really talk too much?

by OmniTouch International OmniTouch International No Comments

In this short article I talk about Agent KPIs in the Contact Centre.

“But Dan…if we don’t have an Average Handling Time target the Agents will talk too much.”

That’s what so many Team Leaders tell me in classrooms.

But I’ve never yet met an Agent who says, “Dan…I go to work and make sure I talk a long time to everyone.”

So where’s the disconnect?

For a lot of Team Leaders it comes down to justifying the KPIs set by management. Because if the big bosses say we have to keep Agents from talking too much there must be some truth to the belief that Agents will talk too much if you give them the chance.

Usually when you dig a little deeper with the Team Leader you find that it’s one person that’s ‘talking too much’.

Not everyone.

So that instance can be analyzed and fixed.

When you set KPIs across a majority population just to catch a few outliers you end up creating barriers to great performance.

Folks in the Centre talk more about what not to do vs. the important work of what to do.

If you really want to know how important Customer Experience is to a Contact Centre – don’t just listen to what the Centre management says. Look at the KPIs they ask their Team Leaders to ‘bring out’ in their Agents.

That’s where the real story lies.

Why are you still talking about Average Handling Time?

 

Daniel

Image by Suju at Pixabay.

 

Why are you still talking about Average Handling Time?

by OmniTouch International OmniTouch International No Comments

In this article we talk about Contact Centre Average Handling Time.

So put your feet up on the couch and tell the Dr. – for heaven’s sake, why are we all still talking about Average Handling Time?

The more you talk about AHT, the less you talk about Quality

A psychologist with a patient

I have a theory that’s been proven out over the years.

A see-saw going up and down

Contact Centre Average Handling Time & Quality

The more a Centre and its inhabitants talk (or fret) about Contact Centre AHT – the less they talk (or fret) about Quality.

Sure – Quality gets lip service (who’s going to bash Quality?) – but it’s AHT that reigns supreme.

And for some inexplicable reason, it’s almost always about the Agents.

Yeah – you know – those Agents who brush their teeth in the bathroom mirror every morning and plot how to sabotage AHT.

A young man brushing his teeth“Hmmmm (they say to themselves) – how could I drag the calls today?”

“A few more holds and a bit of nonsensical small talk and I’m sure I can knock AHT out of whack.”

Really?

Any Quality Assurance professional will tell you a simple truth

AHT flows from Quality.

Exhaust coming from an automobile tailpipe

Average Handling Time is an outcome

It’s an output…a byproduct…an emission.

You know those Monitoring Forms with the checklists and standards that QA likes to hand out to let you know how you’re doing with regard to Quality?

Those Forms dictate your Contact Centre Average Handling Time.

Want Agents to use the Customer’s name 3x? Ok – that’ll be about 15 seconds.

Want Agents to say “Is there anything else I can do to help you today (and mean it)?” – that easily adds 7 more seconds.

Need Agents to conduct 2 levels of verification – yup – takes time.

Are you fearless enough to put First Contact Resolution on your Form? Well that’s gonna cost you too (in time that is).

If your Agent scores 100% quality on their call and you still have to talk to them about their AHT something’s wrong with the Form or something’s wrong with your Quality process.

A guru floating in the air As I like to say when I transition into ‘guru’ mode – when your Agent achieves Quality – and it just feels right – then AHT will be what it will be.

Contact Centre Average Handling Time flows from Quality.

But most assuredly Quality does not flow from Contact Centre Average Handling Time!

A delicious piece of chocolate lava cakeDid you ever order chocolate lava cake for dessert in a restaurant? It’s delicious.

But the menu often says “please order early, or just be aware it will take about 20 minutes for us to make you this delicious chocolate lava cake”.

I’ve never seen it happen that a Diner bangs the table and says – “Hey, Chef baby – make me one of those delicious chocolate lava cakes in 10 minutes – you hear? ”

So what’s the best way to correct Contact Centre AHT at the Agent level?

The best way has always been – and it will continue to be – conducting root cause analysis at the Agent level.

Watch the Agent at work, listen to calls, correct what needs to be corrected (sometimes it’s a piece of equipment, sometimes it’s knowledge or skill).

When you fix Agent Quality – you automatically fix AHT. It’s an outcome – not a driver.

Of course having a guideline helps.

Contact Centre AHT lends itself beautifully to measurement as an ‘acceptable range’.

A graph showing acceptable range

Contact Centre Average Handling Time Acceptable Range

For example an ‘acceptable’ range for your Centre AHT in the mornings might range from a low of 3 minutes to a high of 6 minutes.

I’d set my ‘acceptable’ range based on my high performers in quality – if your call is great quality-wise – then by default the AHT is acceptable. (if it isn’t something is broken in how you measure quality).

Armed with a range, you can track performance across your Team Members and identify outliers – for example those who are consistently above or below the acceptable range for that time period.

This approach allows you to focus in on folks who may have some barrier in their way.

Do remember though –

Acceptable ranges are not consistent throughout the day – most Centres see longer AHT in the night hours as compared to the morning hours (for example).

You have to adjust your ranges based on your call mix, Customer mix and the like.

If you’re in WFM or Process AHT matters

Of course – if you are in WFM (Workforce Management)or you are in Process improvement and/or Customer journey mapping, AHT is super important.

And WFM folks tend to understand that the biggest improvements in AHT come from technology and process improvement.

When you look at all the factors that ‘drive’ AHT, Agents themselves have only minor control over AHT – namely applying their knowledge, skills & abilities as trained and coached.

Industry-wide AHT for voice calls is going up

Children in front of a fun-house mirrorAs the world increasingly becomes digital, Customers reach out to voice channels when their issue is complex or they are confused or unhappy with something.

Coupled with the digitization of ‘simple’ inquiries the outcome is clear – while voice volumes may be ‘stabilizing’ in volume for some Centres, AHT continues to climb.

Feel better? I do

In an era of Customer experience, it won’t do you or your Team Members any good to have an artificial clock ticking in their ear while trying to listen, empathize and resolve a Customer call.

If you’re a Manager or Team Leader who still harps on individual Agent AHT it’s time to rethink your value.

It’s not 1973 anymore.

Thanks for reading!

Daniel

daniel.ord@omnitouchinternational.com / http://www.omnitouchinternational.com

A picture of Daniel Ord

Daniel Ord

 

Why are you still talking about Average Handling Time?

by OmniTouch International OmniTouch International No Comments

It’s time to talk about that old favorite – Average Handling Time also known as AHT.

So put your feet up on the couch and tell the Dr. – for heaven’s sake, why are you still talking about Average Handling Time?

 

The more you talk about AHT, the less you talk about Quality

I have a theory that’s been proven out over the years.

The more a Centre and its inhabitants talk (or fret)  about AHT – the less they talk (or fret) about Quality.

Sure – Quality gets lip service (who’s going to bash Quality?) – but it’s AHT that reigns supreme.

And for some inexplicable reason, it’s almost always about the Agents.

Yeah – you know – those Agents who brush their teeth in the bathroom mirror every morning and plot how to sabotage AHT.

Hmmmm (they say to themselves) – how could I drag the calls today?” 

“A few more holds and a bit of nonsensical small talk and I’m sure I can knock AHT out of whack.”

Really?

Any Quality Assurance professional will tell you a simple truth

AHT flows from Quality.

It’s an output…a byproduct…an emission.

You know those Monitoring Forms with the checklists and standards that QA likes to hand out to let you know how you’re doing with regard to Quality?

Those Forms dictate your AHT.

Want Agents to use the Customer’s name 3x? Ok – that’ll be about 15 seconds.

Want Agents to say “Is there anything else I can do to help you today (and mean it)?” – that easily adds 7 more seconds.

Need Agents to conduct 2 levels of verification – yup – takes time.

Are you fearless enough to put First Contact Resolution on your Form? Well that’s gonna cost you too (in time that is).

If your Agent scores 100% quality on their call and you still have to talk to them about their AHT something’s wrong with the Form or something’s wrong with your Quality process.

As I like to say when I transition into ‘guru’ mode – when your Agent achieves Quality – and it just feels right – then AHT will be what it will be.

AHT flows from Quality.

But most assuredly Quality does not flow from AHT!

Did you ever order chocolate lava cake for dessert in a restaurant? It’s delicious.

But the menu often says “please order early, or just be aware it will take about 20 minutes for us to make you this delicious chocolate lava cake”.

I’ve never seen it happen that a Diner bangs the table and says – “Hey, Chef baby – make me one of those delicious chocolate lava cakes in 10 minutes – you hear? ”

So what’s the best way to correct AHT at the Agent level?

The best way has always been – and it will continue to be – conducting root cause analysis at the Agent level.

Watch the Agent at work, listen to calls, correct what needs to be corrected (sometimes it’s a piece of equipment, sometimes it’s knowledge or skill).

When you fix Agent Quality – you automatically fix AHT.  It’s an outcome – not a driver.

Of course having a guideline helps.

AHT lends itself beautifully to measurement as an ‘acceptable range’.

For example an ‘acceptable’ range for your Centre AHT in the mornings might range from a low of 3 minutes to a high of 6 minutes.

I’d set my ‘acceptable’ range based on my high performers in quality – if your call is great quality-wise – then by default the AHT is acceptable. (if it isn’t something is broken in how you measure quality).

Armed with a range, you can track performance across your Team Members and identify outliers – for example those who are consistently above or below the acceptable range for that time period.

This approach allows you to focus in on folks who may have some barrier in their way.

Do remember though –

Acceptable ranges are not consistent throughout the day – most Centres see longer AHT in the night hours as compared to the morning hours (for example).

You have to adjust your ranges based on your call mix, Customer mix and the like.

If you’re in WFM or Process AHT matters

Of course – if you are in WFM or you are in Process improvement and/or Customer journey mapping, AHT is super important.

And WFM folks tend to understand that the biggest improvements in AHT come from technology and process improvement.

When you look at all the factors that ‘drive’ AHT, Agents themselves have only minor control over AHT – namely applying their knowledge, skills & abilities as trained and coached.

Industry-wide AHT for voice calls is going up

As the world increasingly becomes digital, Customers reach out to voice channels when their issue is complex or they are confused or unhappy with something.

Coupled with the digitization of ‘simple’ inquiries the outcome is clear – while voice volumes may be ‘stabilizing’ in volume for some Centres, AHT continues to climb.

Feel better? I do

In an era of Customer experience, it won’t do you or your Team Members any good to have an artificial clock ticking in their ear while trying to listen, empathize and resolve a Customer call.

If you’re a Manager or Team Leader who still harps on individual Agent AHT it’s time to rethink your value.

It’s not 1973 anymore.

Thanks for reading!

Daniel

daniel.ord@omnitouchinternational.com / www.omnitouchinternational.com